Megalith Posted January 3, 2010 Share Posted January 3, 2010 Out of curiosity, are everyone's sidedoor latches consistent with one another? The sidedoor latches on the right side of my case have more significant resistance compared to the left, and it also seems that there are alignment problems; once I put the door on, the rail (piece that the latches are attached to) doesn't seem to slide all the way to the back of the case, as evidenced by the panel-release button not becoming flush with the exterior. Link to comment Share on other sites More sharing options...
boogieman Posted January 3, 2010 Share Posted January 3, 2010 Back side button on mine does not fully retract either but the side door does latch. Link to comment Share on other sites More sharing options...
trond Posted January 3, 2010 Share Posted January 3, 2010 I have to bang the sidedoor in place for the rail to retract properly. Or give the top of the sidedoor a good slam after it's in place. The latches seem to be very tight on my case. Link to comment Share on other sites More sharing options...
boogieman Posted January 3, 2010 Share Posted January 3, 2010 It helps a lot to push the button in while putting the side panel on too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.