LilDeamon Posted December 27, 2009 Share Posted December 27, 2009 Hello I am asking for help with my recently purchased TWIN2X4096-8500C5C memory modules. The problem is that when I have installed them and turned on the pc the 2 monitors stay on standby and I cannot do anything. This happened also when I had Windows XP Home Edition 32 bit and still occurs after updating to 64 bit. I can only access the pc when I have the old 2gb module installed. I seriously have no idea what to do. :S Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 14, 2010 Corsair Employees Share Posted January 14, 2010 Sorry for the late post but I would try with just the new modules installed to reset or clear the BIOS and see if it will post and let you set the tested settings after you load setup defaults. Link to comment Share on other sites More sharing options...
ByrneIT Posted January 15, 2010 Share Posted January 15, 2010 I'd stop wasting your time and return it to the vendor. If you still want to use Corsair, I've had good luck with TWIN2X4096-6400C4DHX which WIndows 7 shows at exactly the same "rating" as the Dominator 8500CD Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.