Jump to content
Corsair Community

Asus P5N-D and 2 pairs of TWIN2X2048-8500C5D


GeneralDodo

Recommended Posts

This thread is for a computer I set up for a friend of mine.

 

It's specs are as follows:

 

C2D E8400

TWIN2X2048-8500C5D ( 2 of these kits. ) (4x1gb)

Asus P5N-D

BFG 9800GT 512MB

 

I used to have a Q9550 on the motherboard with the same 4 DIMMS, (2 sets of 2x1GB RAM ) and it used to boot up fine and run extremely well.

 

Then suddenly I use an E8400 on the same motherboard with the same 4 DIMMS.. and it won't boot. It'll post with 1, 2 and 3 sticks of ram, tested each stick of ram individually also and nothing. Won't post with the 4 sticks together.

 

I don't understand what's going on and why the RAM isn't working. I've tried raising the memory voltage to 2.2, raising NB voltage to 1.4, lowering the RAM frequency to 667.. nothing. :[

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...