srgody Posted December 10, 2009 Share Posted December 10, 2009 Can anyone post a ATTO or Crystal performance test, for the X Series SSD connected to a P55 chipset. Im trying to figure out why my X64 is slow. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 11, 2009 Corsair Employees Share Posted December 11, 2009 Can you post the ATTO Results and what is your the system system configuration? And how did you setup the SSD Drive? Link to comment Share on other sites More sharing options...
boerenlater Posted December 11, 2009 Share Posted December 11, 2009 Attached to SATA port 1 and IDE/AHCI in bios? Do you have any power saving setting enabled in the bios? Link to comment Share on other sites More sharing options...
mochti01 Posted December 11, 2009 Share Posted December 11, 2009 My 2 X64 are working very well with the P55. Here are 2 Atto Screens. Drive "c" is my system drive and drive "d" is my gaming drive. Compare to the 790GX the P55 runs even a bit faster. :) http://www.abload.de/thumb/adsftoz5.png http://www.abload.de/thumb/hgqawwtip.png Link to comment Share on other sites More sharing options...
srgody Posted December 11, 2009 Author Share Posted December 11, 2009 Thanks to those that replied, Ive decided to reload everything from the start and setup as per directions and see how that goes, I will comment once its done. Thankyou Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 11, 2009 Corsair Employees Share Posted December 11, 2009 The spec for that drive would be 220 MB/s sequential read and 135 MB/s sequential write so the performance is about right for those drives according to what you posted but I would try and Quick format the drives with 32K Allocation set for the format and retest them. Link to comment Share on other sites More sharing options...
mochti01 Posted December 12, 2009 Share Posted December 12, 2009 The spec for that drive would be 220 MB/s sequential read and 135 MB/s sequential write so the performance is about right for those drives according to what you posted but I would try and Quick format the drives with 32K Allocation set for the format and retest them. I know, but I'm not the starter of the thread. :D: I only postet the Atto Screens for srgody because I'm having a P55 board and two X64. But, do you think they could be faster? :biggrin: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.