Surnia Posted December 7, 2009 Share Posted December 7, 2009 The supplied corsair PWM fan is clicking now.... Should I be concerned about this, and is there any way to prevent it? would changing the RPM do anything? RPM is about 1000, and it usually doesn't go any faster (at highest, 1015) thanks to the low temps it keeps. thanks for any help! - Surnia Link to comment Share on other sites More sharing options...
heliman41 Posted December 7, 2009 Share Posted December 7, 2009 Pretty much any 120mm fan will fit the Corsair Radiator if you need on on the spot from any PC store. Im doing a push/pull fan setup on my Radiator & my extra fan is a 3 speed so I just set its speed to match the original fan. If you dont see anything interfering with the fanblades then you probably outta change it before it possibly goes out on you. Link to comment Share on other sites More sharing options...
shinraorg Posted December 11, 2009 Share Posted December 11, 2009 Yeah try and contact Corsair to get a replacement fan. I will be doing the same since i have the same problem. I bought two H-50's One works perfectly and on the otherone the fan clicks. :(: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.