Gris Posted November 14, 2009 Share Posted November 14, 2009 I assume I go into the BIOS and go to the DRAM settings and use 2.1V, 5-5-5-15-2T and set my speed at 1066 (8500)? I've heard this isn't the optimal setting for my particular mobo, though. Can anyone suggest what timing, voltage, and speed I should use with my mobo? (click my name to see memory and mobo specs) Link to comment Share on other sites More sharing options...
Wired Posted November 14, 2009 Share Posted November 14, 2009 Are you using 2 sticks or 4 sticks? You didn't list a part number in your specs. Link to comment Share on other sites More sharing options...
Gris Posted November 14, 2009 Author Share Posted November 14, 2009 2 sticks of 2 GB TWIN2X4096-8500C5D (fixed in my profile now) Link to comment Share on other sites More sharing options...
Gris Posted November 17, 2009 Author Share Posted November 17, 2009 Bump bump bump Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2009 Corsair Employees Share Posted November 17, 2009 Just make sure that you have the latest BIOS then load setup defaults and set the memory Voltage to 2.1 Volts and set the memory Frequency at DDr1066 and set the tested settings IE Cas 5-5-5-15 2t Command Rate. Link to comment Share on other sites More sharing options...
Gris Posted November 17, 2009 Author Share Posted November 17, 2009 Thank you very much. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2009 Corsair Employees Share Posted November 17, 2009 NP Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.