Jump to content
Corsair Community

Size pump unit


Doomah

Recommended Posts

Hello!

 

I was thinking about building a new system into a silverstone sugo 03/04. The only downside of this case is the height allowed for the CPU cooler: Its 82 mm (3 1/4 inch). A great solution would be the H50. However, I can't find anywhere the height of the pump/reservoir unit (the part you mount upon your cpu).

 

Also, are the tubes flexible enough?

 

-Doomah

Link to comment
Share on other sites

The pump itself is a little taller than the older Corsair Dominator memory (like 1/4 of an inch) while strapped down to the processor. The hoses as long as you can keep them around an inch over the top of your video cards at the maximum flex all should be fine. Looking at that case it may be interesting to do. Tight squeeze
Link to comment
Share on other sites

The PSU is about the heigth of the video cards if I see it right.

 

Perhaps if anyone has standing a H50 in his system can try to bend their hoses to the height of their video card? Please tell me how far you came. (But don't go to far, don't break it :P)

 

And what will be the limit? Will the hoses just don't bend any further or will they break and start leaking? Or will they fold in and prevent any water to flow trough them?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...