elmaizal Posted October 28, 2009 Share Posted October 28, 2009 Hi, I was hoping someone could help me I bought TR3X6G1600C8 at 1600 MHZ and its supposed to be PC3-12800 but I have it as PC3-10700H and the timings are all wrong. I had to manually change them to 8-8-8-24 from 11-11-11-41 and can not change the tRC nor the Command rate Attached are my CPU-Z images and any ideas would be great. Please help Link to comment Share on other sites More sharing options...
CLiNTPELiX Posted October 29, 2009 Share Posted October 29, 2009 On a P55 board Asus Maximus III Formula, I notice the same behavior with CMG4GX3M2A1600C7. Detected by Memtest86+ 4.0 or Everest as PC3-10700H. Moreover, XMP profile doesn't exactly the same written on module. I have to manually force settings and there's no problem. Link to comment Share on other sites More sharing options...
elmaizal Posted October 29, 2009 Author Share Posted October 29, 2009 I am using an EVGA X58 3X SLI MOBO with a corsair 850HX, I have already reset my bios and re ordered my ram. Any ideas why it shows up as another ram and the factory settings are not recognized by the mobo? Link to comment Share on other sites More sharing options...
CLiNTPELiX Posted October 29, 2009 Share Posted October 29, 2009 I've seen on this forum IMC and DRAM tensions are very important. Default settings are not always the right choose. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.