Jump to content
Corsair Community

Memory errors with two pairs of TWIN2X4096-8500C5D on Gigabyte GA EP45-DS3


Recommended Posts

Hello folks!


I ran one pair of TWIN2X4096-8500C5D (rev. 1.1) on my Gigabyte GA EP45-DS3 @1066MHz 5-5-5-15 for 9 months with no problems at all.


Now I want to switch to Windows 7 (64 bit) with 8GB of RAM. So I decided to buy another pair of TWIN2X4096-8500C5D (rev. 2.1 now!). I've tried the following settings:


- 1066MHz, 5-5-5-15, Vdimm 2.1V: memtest86+ shows some errors

- 1066MHz, 5-7-7-24, Vdimm 2.1V: memtest86+ shows some errors too


Any ideas how to run them @1066MHz? Or do I have to fall back to 800MHz to run them stable?


Thanks for help in advance with best regards from germany...

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...