Jump to content
Corsair Community

Corsair Flash Voyager 8GB Starts and Stops


Freejack

Recommended Posts

Insert Voyager.

Blue light flashes.

Drive is recognized.

About 30 seconds later it disappears from the system.

 

Windows Event Log:

 

Date: 10/22/2009 Source: Disk Time: 8:24:30 AM Category: None Type: Warning Event ID: 51 User: N/A Computer: CSCHELIN-LT

 

Description:

An error was detected on device \Device\Harddisk1\D during a paging operation.

 

 

System is a Dell Latitude D610 with Windows XP Professional (work laptop).

Same problem on an HP with Ubuntu, my personal Mac Powerbook G4, and my personal Windows XP Professional based home system (listed in my System Specs above).

 

Carl

Link to comment
Share on other sites

Logs from the HP running Ubuntu:

 

Oct 22 12:11:40 transalp kernel: [18721.360025] usb 1-4: new high speed USB device using ehci_hcd and address 3

Oct 22 12:11:40 transalp kernel: [18721.850938] usb 1-4: configuration #1 chosen from 1 choice

Oct 22 12:11:41 transalp kernel: [18722.231026] Initializing USB Mass Storage driver...

Oct 22 12:11:41 transalp kernel: [18722.231497] scsi4 : SCSI emulation for USB Mass Storage devices

Oct 22 12:11:41 transalp kernel: [18722.232498] usbcore: registered new interface driver usb-storage

Oct 22 12:11:41 transalp kernel: [18722.232506] USB Mass Storage support registered.

Oct 22 12:11:46 transalp kernel: [18727.232854] scsi 4:0:0:0: Direct-Access Corsair Flash Voyager 0.00 PQ: 0 ANSI: 2

Oct 22 12:11:46 transalp kernel: [18727.234366] sd 4:0:0:0: [sdb] 15794176 512-byte hardware sectors: (8.08 GB/7.53 GiB)

Oct 22 12:11:46 transalp kernel: [18727.234980] sd 4:0:0:0: [sdb] Write Protect is off

Oct 22 12:11:46 transalp kernel: [18727.239987] sd 4:0:0:0: [sdb] 15794176 512-byte hardware sectors: (8.08 GB/7.53 GiB)

Oct 22 12:11:46 transalp kernel: [18727.240603] sd 4:0:0:0: [sdb] Write Protect is off

Oct 22 12:11:46 transalp kernel: [18727.240623] sdb: sdb1

Oct 22 12:11:46 transalp kernel: [18727.372414] sd 4:0:0:0: [sdb] Attached SCSI removable disk

Oct 22 12:11:46 transalp kernel: [18727.372503] sd 4:0:0:0: Attached scsi generic sg2 type 0

Oct 22 12:11:54 transalp kernel: [18735.900032] usb 1-4: reset high speed USB device using ehci_hcd and address 3

Oct 22 12:11:56 transalp kernel: [18737.574102] sd 4:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK

Oct 22 12:12:26 transalp kernel: [18768.101531] usb 1-4: reset high speed USB device using ehci_hcd and address 3

Oct 22 12:12:31 transalp kernel: [18772.940048] usb 1-4: USB disconnect, address 3

Oct 22 12:12:31 transalp kernel: [18772.940168] sd 4:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK

Oct 22 12:12:31 transalp kernel: [18772.940299] sd 4:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK

Oct 22 12:12:31 transalp kernel: [18772.946573] lost page write due to I/O error on sdb1

Oct 22 12:12:31 transalp kernel: [18772.946589] lost page write due to I/O error on sdb1

Oct 22 12:12:31 transalp kernel: [18772.946603] lost page write due to I/O error on sdb1

Oct 22 12:12:31 transalp kernel: [18772.946617] lost page write due to I/O error on sdb1

Oct 22 12:12:31 transalp kernel: [18772.946653] lost page write due to I/O error on sdb1

Link to comment
Share on other sites

  • 4 months later...

I received the new flash drive back in November I guess. I've been using it and inserted it into my Mac when I got home today:

 

Mar 10 16:46:40 carl-schelins-powerbook-g4-15 kernel[0]: disk1s1: I/O error.

Mar 10 16:46:40 carl-schelins-powerbook-g4-15 diskarbitrationd[39]: unable to mount /dev/disk1s1 (status code 0x00000047).

Mar 10 16:47:20 carl-schelins-powerbook-g4-15 kernel[0]: disk1s1: I/O error.

Mar 10 16:47:20 carl-schelins-powerbook-g4-15 diskarbitrationd[39]: unable to mount /dev/disk1s1 (status code 0x00000047).

Mar 10 17:08:55 carl-schelins-powerbook-g4-15 kernel[0]: disk1s1: I/O error.

Mar 10 17:08:55 carl-schelins-powerbook-g4-15 diskarbitrationd[39]: unable to mount /dev/disk1s1 (status code 0x00000047).

 

Looks like the stick failed again?

 

Carl

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...