jarno007 Posted October 20, 2009 Share Posted October 20, 2009 Hij i got a haf922 as case and want to bij the crosair hydro cpu H50. Ant i am wondering if i can also Mount in in one of the 120mm slot on the top side of the case or on of the side pannels. i would preffer to mount on one of the 2 top slot of 120mm fan please anser back soon ant thanks for the help (p.s dont mind the bad spelling i not very good at english and am Dyslexi) :sunglasse:sunglasse :evil: Link to comment Share on other sites More sharing options...
barrd123 Posted October 20, 2009 Share Posted October 20, 2009 I have the same case and I mounted my H50 in the place where the 140mm fan was in the rear of the case. That way, I still have the intake 230mm on the front, the side and the exhaust 230mm on top. The H50 fan is first then the radiator with the fan blowing IN the case. Works pretty good. You can remove the 230mm fan on top and put it there if you want also. Link to comment Share on other sites More sharing options...
LordVampyre Posted October 21, 2009 Share Posted October 21, 2009 I too have this case, I have 3 230's (front, side door, top) the H50 on the back 120mm area and from my old temps, in my old case Ive dropped an average from 10 to 19 degrees. Oh, Im also having the H50's fan suck air into the case and the top 230 takes all the heat out. oh yea the biggest drop in temp was my hard drives.. around 20degrees. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.