Jump to content
Corsair Community

TR3X6G1600C8 ASROCK x58 Extreme Unstable


Recommended Posts



I just completed a build with these two components and I am getting system instability. The motherboard recognizes the ram at 1033(or maybe its 66) mhz and runs fine at that speed, but when I go to 1333 or 1600 it hard locks with no bluescreen during use. I ran Memtest+ 4 at 1033 and it passed. When I used the xmp profile 1.2 that was in the motherboard bios for 1600 it ran 5 passes on memtest with no errors and froze.


Is the problem because the xmp profile isn't correct on my motherboard or do I need to get new ram?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...