Jump to content
Corsair Community

TR3X6G1866C9DF hELP W\ timing PLEASE!!


Recommended Posts

Ideally you should be able to set your memory to XMP Profile 1, set your DIMM voltage to 1.65, and leave everything else on Default settings. If that does not work then you might have to adjust your CPU VTT to 1.35v or 1.4v.


Manual way:


Sticker Picture


Set to this


Memory Feature


Memory Speed ( Standard )

Memory Control Setting ( Enabled )

Memory Frequency ( 2:14 )

Channel Interleave Setting ( 6 Way )

Rank Interleave Setting ( 4 Way )

Memory Low Gap ( Auto )

tCL Setting ( 9 )

tRCD Setting ( 9 )

tRP Setting ( 9 )

tRAS Setting ( 24 )

tRFC Setting ( 88 )

Command Rate ( 2T )


Voltage Control


DIMM Voltage ( 1.65v )


Run SuperPI or HyperPI for a quick glimpse of stability. And then when you have a good ten hours of time to spare run Memtest 86+ v4.00 to rule out the possibility of memory defects.


There is also a thread on this What are the correct timings for My Dominator Module? (Decent info there)

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...