Stephen Real Posted October 10, 2009 Share Posted October 10, 2009 I am having some difficulty adding extra RAM to this system. I can install a single Corsair Value Select VS1GB400C3 1GB DDR1 Module. This will work properly, but when I add and extra modules (exact same item - VS1GB400C3) or a 3rd Module, the system starts with a long beep and will not boot up properly. If I remove the 2nd and 3rd module, it starts properly with only 1GB of RAM. Can someone advise if there are other things to try? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 16, 2009 Corsair Employees Share Posted October 16, 2009 With that MB when you install two or more modules you may have to slow the memory down, I would suggest just two modules at DDR333 at 2.75 Volts and test the system with http://www.memtest.org to e sure it is stable. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.