domdaoc Posted October 2, 2009 Share Posted October 2, 2009 Ran Memtest86+ failed. But I'm not sure the timings are set right. I choose default in the BIOS but CPU-Z tells me different numbers than the SPD. It reports: 5-7-7-24 2T I can set them manually in the Bios but I have to set all the timings and I don't know what value to give the following: TRFC TWR TWTR TRRD TRTP Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 2, 2009 Corsair Employees Share Posted October 2, 2009 Just load setup defaults and then set the tested settings and Voltage IE Cas 5-5-5-15 2t Command Rate at 2.1 Volts and then test the modules one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.