Roeken Posted October 1, 2009 Share Posted October 1, 2009 I've bought 4x Corsair Dominator 1GB 1066Mhz, Model number CM2X1024-8500C5D (XMS2-8500) when i got all 4 inserted the system wont boot, fans and everthing starts but i get no beep sound and the monitor dosnt light up, when i only have 2/3 inserted the system boots up, Any help would be appriciated System Spec Motherboard: P5QL Pro CPU: Intel Core 2 Duo E8400 Memory: 4x1GB Corsair Dominator 1066MHZ XMS2-8500 GFX: Gigabyte Nvidia GeForce 9800GTX+ HDD: 1x500GB WD Caviar Black SATA 2 / 1x1TB WD Caviar Green SATA 2 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 1, 2009 Corsair Employees Share Posted October 1, 2009 With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Roeken Posted October 2, 2009 Author Share Posted October 2, 2009 thanks for your quick reply, i will try this soon, atm i have the computer on repair, since this P5QL pro mother board i bought had another problem with the CHASSIS funktion and wouldnt disable it even tho the JUMPER was as it should be according to manual, i will post back here when i've gotten my computer home and been able to try this Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 5, 2009 Corsair Employees Share Posted October 5, 2009 NP Please let us know how you make out! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.