Surnia Posted September 29, 2009 Share Posted September 29, 2009 I'm interested in running the H50 as an exhaust fan, with push/pull config. Second fan is a Scythe, and their supplied screws appear to be way too thick to be used properly with the radiator. Anyone know the threads for the radiator, so I may be able to find some? If i'm unable to find the screws, should the radiator run fine with only a PULL fan (only have the 4 screws that came with the H50 at the moment, and i need them to mount the fan as well as the radiator)? i'd rather not get dust into the computer, with all the other intakes filtered.. Link to comment Share on other sites More sharing options...
curlysir Posted September 29, 2009 Share Posted September 29, 2009 The stock screws are 6 X 32 X 1 1/4" machine screws. See this thread http://forum.corsair.com/forums/showthread.php?t=81196 Link to comment Share on other sites More sharing options...
Hedghawg71 Posted September 30, 2009 Share Posted September 30, 2009 I get them at Lowes or Home Depot and also, a couple of those thin brass washers for shims just in case. Maybe $3 USD out of pocket. :D: Now if I can just get that 1156 bracket... Link to comment Share on other sites More sharing options...
Surnia Posted September 30, 2009 Author Share Posted September 30, 2009 thanks very much, will see when i have time to run to home depot/lowes. anyone have any idea about the H50 being used only to pull air out? Link to comment Share on other sites More sharing options...
Hedghawg71 Posted September 30, 2009 Share Posted September 30, 2009 I've "read" from another forum I'm on that it doesn't make much difference as long as you don't have a room heater for a computer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.