Gigabyte GA-EP45-DS3L TWIN2X4096-8500C5D BSOD

[69GT]

Hi,

 

I'm having heaps of problems with this mobo and ram. At first i thought the ram was faulty in someway even though i ran memtest for several hours with no errors. I returned the ram got new pair and still having the same issues.

 

My computer constantly bsod and locks up. I've done a clean install over and over again but still the same problems.

 

I've tried changing the setttings manually even loosen the timings and raised the volts..

 

can someone help me please..

 

Cheers!

[RAM GUY]

Please make sure that you have the latest BIOS version and then with just one module installed load setup defaults and set the memory Voltage to 2.1 Volts and then exit the BIOS and run http://www.memtest.org on the modules one at a time to be sure one is not failing.

If they both pass install both modules in the second set of slots and repeat the steps above and let me know the results.

[69GT]

Please make sure that you have the latest BIOS version and then with just one module installed load setup defaults and set the memory Voltage to 2.1 Volts and then exit the BIOS and run http://www.memtest.org on the modules one at a time to be sure one is not failing.

If they both pass install both modules in the second set of slots and repeat the steps above and let me know the results.

 

Yeah i have F10 bios which is the latest one, I tried each one idividually and ran memtest for several hours with no errors..

Cheers

[RAM GUY]

Then more than likely the problem is not the memory did you check the error code on Microsoft.com/technet?