Jump to content
Corsair Community

Blue Screen Problem


Recommended Posts



Couple of days ago i bought the corsair rams and After that time i have been facing with blue screens.(Memory Management & irql_not_less_or_equal) I juice the voltages for the ram 2.1V and i tested the Memory for bad ram issue and you can see the result for the MEMTEST86 below. There is red lines i thought means problem with the ram.



Could it be a bad ram.


Any help will be appreciated.


Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.1 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...