Jump to content
Corsair Community

bios correct settings


florin

Recommended Posts

HI ALL.I AM PLANING TO BUY TWIN2X4096-6400C5 G KIT BUT I'M A LITTLE CONFUSED ON THE SPECIFICATIONS FROM THE CORSAIR WEBSITE: Tested at JEDEC standard latency settings (5-5-5-18) at 1.9V.I KNOW THAT THE STANDARD IS 1.8V SO MY QUESTION IS WILL THEY WORK ON MY ASUS P5KPL/1600 MOTHERBOARD WITH DEFAULT BIOS SETTINGS(I MEAN BY THIS MEMORY OVERVOLTAGE SET ON AUTO).I'M NOT A COMPUTER EXPERT AND I DON'T OVERCLOCK MY MOTHERBOARD.

 

THANK IN ADVANCE AND SORRY FOR MY ENGLISH.

Link to comment
Share on other sites

  • Corsair Employees
Yes they will run on that system most of the modules produced are all 1.8 Volts but that part is spec'ed at 1.9 Volts. If your MB will not allow you to set the memory Voltage you might consider TWIN2X4096-6400C5DHX as that part is rated at 1.8 Volts.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...