stugol Posted September 26, 2009 Share Posted September 26, 2009 Hi. I'm a newbie and tried to read the FAQ for the last 48 hours. I've got an ASUS MB P5Q SE Plus with TWIN2X4096-8500C5C. According to FAQ recommendations, Ive set the below: DRAM Frequency: DD2-800 CAS Latency: 5T RAS to CAS: 5T RAS Precharge: 5T Cycle Time: 15T DRAM Voltage: 2.1 All others left untouched. I saw in CPU-Z, that my DRAM frequency is 399.7 MHz. I would like to run at 533Mhz, and get 1066 MHz. What am I doing wrong? Thanks in advance. Link to comment Share on other sites More sharing options...
Sylvainp Posted September 26, 2009 Share Posted September 26, 2009 Change your DRAM frequency to 1066. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 29, 2009 Corsair Employees Share Posted September 29, 2009 TWIN2X4096-8500C5C settings should be: DDR Voltage: 2.1 Volts CAS Latency: 5T RAS to CAS: 6T RAS Precharge: 6T Cycle Time: 18T Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.