Asus P6T Deluxe v2 + TR3X6G1866C9DF

[liquid90]

Hi , I just receive my new system before overclock I wanted to make sure all my component are Good so ive started right away with MEMTEST86 Right away I it freeze after 4 seconds,

(my ram is at hes rated speed, timing, voltage ( NO OC CPU))

 

So i went online and read something about disable USB LEGACY

 

I did so, then i was still freezing ( after 4 seconds )

 

But i could successfully run 2 test on every RAM STICK INDIVIDUALLY without any problem , ive try all the slot ( A1-B2-B3 ) NO PROBLEM AT ALL.

 

Has soon that I put the ram in DUAL or TRIPLE channel I freeze?

 

Is this mean that my ram can't handle triple channel ?

problem with mobo ?

cpu memory controller ?

 

Here's my current spec:

 

p6t deluxe v2

core i7 920 D0

TR3X6G1866C9DF

TX750 Watt

 

 

Im very confuse please help

[RAM GUY]

Please make sure that you have the latest BIOS version then go to BIOS setup and load setup defaults and enable Profile one then set the QPI DRAM to 1.35 Volts and test the system with http://www.memtest.org version 4.0