deathcells Posted September 25, 2009 Share Posted September 25, 2009 Help !! :( XMS 2 TWINX24096-6400c5c G I installed the twin kit and started up my computer. I immediately saw yellow lines across my startup screen and throughout the POST and windows hangs on the login screen. i knew it was the RAM as it was working fine with a generic single stick of 1G RAM. I removed the second channel stick and it is now projecting fine with no yellow lines and XP64 starts up quickly and properly. I tried different combinations and placements and have narrowed down which stick of the twin set is the faulty one. Is there anything i am overlooking before i send the RAM in and clam warrenty ? thank u for ur help Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 25, 2009 Corsair Employees Share Posted September 25, 2009 Make sure you have the latest BIOS for the board and load setup defaults in the BIOS. If you still have the same problems then lets get the pair replaced! Please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.