Jump to content
Corsair Community

P4P800-E and TWINX1024-3700PT


Cpl_Joe

Recommended Posts

First time building my own pc and was wondering if someone could help me out with an optimal RAM setting. P4 2.8E 800FSB ASUS P4P800-E Deluxe Corsair TWINX1024-3700PT GeForce FX5200 Audigy Gamer Thanks in advance. :biggrin:
Link to comment
Share on other sites

  • Corsair Employees
I can only officially tell you would be the tested setting for any given module! DRAM Clock: Manually set to 1:1 or 400MHz SDRAM CAS Latency: 3T SDRAM RAS to CAS Delay (tRCD): 4T SDRAM Row Precharge (tRP): 4T SDRAM Active to Precharge Delay (tRAS): 8T SDRAM Bank Interleave: 4 Bank All other settings are motherboard defaults. In addition to this, I would suggest setting the Dim Voltage to 2.75 Volts! However, if you are not over clocking the CPU you might be able to get the system to run at Cass 3-3-3-8!
Link to comment
Share on other sites

Thanks for the settings, I'd let you know how it worked out but my mobo is not posting up and I'm in the process of getting a replacement. Minimum 7 days til I recieve it. I'll post the results of these settings asap. Thanks again.
Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...