Mickel Posted September 23, 2009 Share Posted September 23, 2009 Good morning, I'm having serious problems configuring my system. All seems to be ok when I leave all setting to auto, but when I try to set latency to 8-8-8-24 at 1600MHz, the system is very unstable. I've executed memtest and prime95 with each module separately and it crashes as soon as I touch the default config. I've also tried the configuration shown in thread "Dominator Qualification and Testing Updated 5-05-2009" (but I don't know how to set QDI voltage, or if I can). It think there must be something wrong in the other settings, but don't know what to put in each setting: CAS# Latency = 8 RAS to CAS R/W Delay = 8 Row Precharge Time = 8 Minimum RAS Active Time = 24 1T/2T Command Timing = ? TwTr = ? Trfc0 for DIMM1 = ? Write Recovery Time = ? Precharge Time = ? Row Cycle Time = ? RAS to RAS Delay = ? DQS Training Control = ? CKE Power Down Mode = ? CKE Power Down Control = ? Memclock tri-stating = ? Bank Swizzle Mode = ? Anyone can help, please? Thanks a lot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.