Jump to content
Corsair Community

4 pieces of CM2x2048-8500C5D in XFX NFORCE 680i LT


tlon

Recommended Posts

I have 8 GB (4 DDR2 DIMMs) of Corsair CM2x2048 850C5D memory

installed paired in an XFX NFORCE 680i LT SLI SOCKET 775 DDR2 motherboard

 

Can you recommend specific timings for this configuration to achieve maximum performance?

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...