kinlin Posted September 17, 2009 Share Posted September 17, 2009 :D: Hello to all and beforehand thank you very much by its aid. with my previous configuration i have install profecional Windows XP 64bits and fedora 11 64 bits.:eek: When it changes parts everything work, spear that i put the controllers of mother board, when reinitiating both operating systems begin problems of boot. And tried install several operating systems and only ubuntu 9,04 works with some problems crach when running videos, the Windows (eny tipe or version) is not can be install or already install they do not start. :[pouts: I checked the page: http://www.corsair.com/configurator/product_results.aspx?id=867642 and that memory is not compatible, then what I can do? , some advice please? :laughing: Hola a todos y de antemano muchas gracias por su ayuda. con mi anterior configuracion tenia windows xp profecional 64 bits y fedora 11 64 bits. Cuando cambie las piesas todo funciono, asta que puse los controladores de la mother board, al reiniciar ambos sistemas operativos tenian problemas de boot. E intentado colocar varios sistemas operativos y solo ubuntu 9.04 a arrancado y con algunos problemas se crachea al correr videos, los windows no se puden instalar o ya intalados no arrancan. E checado la pagina: http://www.corsair.com/configurator/product_results.aspx?id=867642 y se que las memrias no son compatibles, entonces que puedo hacer?, algun consejo please? Link to comment Share on other sites More sharing options...
Wired Posted September 17, 2009 Share Posted September 17, 2009 They are compatible. What speed / timings / voltage are you using? Link to comment Share on other sites More sharing options...
kinlin Posted September 17, 2009 Author Share Posted September 17, 2009 hello thanks to answer, and set the defauls of the bios, and to position in: speed 1333 timings default, 1.5 voltage (but the PC health status say 1.65) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 19, 2009 Corsair Employee Share Posted September 19, 2009 More than likely that is just reading the SPD not what it is actually running at. Unless XMP is enabled by default. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.