Michel Posted September 16, 2009 Share Posted September 16, 2009 Hello ,gooday to everyone. A week ago i bought a set (2x2Gigs Dominator Twin2x4096-8500c5df) and ive put them into Asus M4A78/HTPC. Default Volt 1.8 (Can i set them on 2.1 ?) Default 800 Mhz (Can i set them on 1067 Mhz ?) I cant find the latency on this mainboard. I search in user guide ,but i cant find Cas ,Ras To Cas ect ect. This is what is whats on user guide. Cas TRCD TRP tRTP TRAS TRC tWR TRRD tWTR tRFC0 tRFC1 tRFC2 tRFC3 Can someone help to me and how to set up the latency for the Asus M4A78/HTPC Would be very thankfull. Nice day everyone. Grtzz. Michel. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 18, 2009 Corsair Employees Share Posted September 18, 2009 To run the modules at DDR1066 you will need to set the memory Voltage to 2.1 Volts. And if there is no setting for SLI Ready Memory then you will need to set them manually. IE DDR1066 at 2.1 Volts Cas-5, TRCD-5, TRP-5, TRAS-15, 2T Command Rate The memory Voltage and frequency will normally be where you set the CPU Frequency but sometime the memory frequency will be in with the memory timings usually under CPU Configuration menu. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.