Jump to content
Corsair Community

Are 6400 and 6400C4 Ram compatible


agarath

Recommended Posts

In the same rig? See attached sig for sys specs.

 

Another person got telling me that I shouldn't run CMS2X1024 - 6400 & CMS2X1024 - 6400C4 modules on the same rig. I've never had ANY problems with this rig UNTIL I took out the E6700 that was stock with the machine, and put in an E8400.

 

And one last question, which of the two sets are better ram?

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

thanks for taking the time to get back to me. The problem (if there was ever one with the ram) has sorted itself out....

 

I went out to NCIX and bought CM2X2048-6400C5. There all better now.

 

Thanks again for taking the time to get back to me.

 

Ag

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...