Jump to content
Corsair Community

TWIN2X2048-8500C5D memory timings on Asus P5QPL-VM EPU


Recommended Posts



I have an Asus P5QPL-VM EPU motherboard with 2 x 1GB PC8500 DDR2 sticks (Corsair TWIN2X2048-8500C5D) supposed to run at 5-5-5-15 2T at 2.1V.


When I set the correct voltage and timings manually in Bios - it won't POST. When I set only memory speed to 1066 and voltage to 2.1V but then timings by SPD it will POST but the timings are 6-5-5-43 2T.


How do I get this memory to run correctly on this motherboard?


Thanks. :confused:

Link to comment
Share on other sites

  • Corsair Employees

That MB only support DDR800 and DDR1066 when over clocked.

4 x240-pin DIMM, Max. 8 GB, DDR2 1066(O.C.)/800/667 Non-ECC,Un-buffered Memory

I would try testing the modules one at a time and see if it will post but I think you may need a 1333 FSB CPU to run the memory at DDR1066.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...