Barrakooda Posted September 7, 2009 Share Posted September 7, 2009 Hi Pc doesnt like 2nd set of ram, getting inconsistant errors, lock ups, etc. I want to manualy set timings but unsure of volts. On memory it says 1.8V but on Corsair pdf it says 1.9V http://www.corsair.com/_datasheets/CM2X2048-6400C5.pdf So do i use 1.9V?? Currently board is set to auto. With the x1 stick of ram i have in it now works fine. If there is anything else to consider with this board please let me know Cheers Barra Link to comment Share on other sites More sharing options...
Wired Posted September 7, 2009 Share Posted September 7, 2009 Use whatever is on the memory label. How many sticks of memory are you using? Link to comment Share on other sites More sharing options...
Barrakooda Posted September 7, 2009 Author Share Posted September 7, 2009 2 sticks of 2gb Link to comment Share on other sites More sharing options...
Barrakooda Posted September 8, 2009 Author Share Posted September 8, 2009 Installed 2nd stick, set timings & volts in bios. All seems good so far. Quirky Asus motherboards i reckon. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 11, 2009 Corsair Employees Share Posted September 11, 2009 If you up and running then you should be fine but if you do have problems I would set the memory Voltage to 1.9-2.0 Volts and maybe try adding .1 Volts to the NB/NB-MCH. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.