Kymnyth Posted September 6, 2009 Share Posted September 6, 2009 Brand new build. 35 Days up and running with everything set to "auto" in the bios AI Tweaker. Started getting BSODs. I ran memtest with no errors initially but left it running a while and found after being up for > 3 hours I would start getting errors. I have shut off USB legacy and set the proper voltage and cas latency and I am getting memory errors when running memtest. Thinking this needs to be RMAed but seems strange it was up for 35 days and then a problem shows up. Any ideas? Link to comment Share on other sites More sharing options...
Kymnyth Posted September 8, 2009 Author Share Posted September 8, 2009 I put some 800mhz OCZ memory into the system and it has been up and running ever since. It all points to a problem with the memory. Link to comment Share on other sites More sharing options...
Wired Posted September 8, 2009 Share Posted September 8, 2009 tried running the memory at that speed? Link to comment Share on other sites More sharing options...
Kymnyth Posted September 8, 2009 Author Share Posted September 8, 2009 Tried running everything on auto. Which to my understanding defaults the memory to 800mhz. I got bsods and memory errors on memtest. That was in addition to running the suggested values of legacy usb disabled, 5-5-5-15, v2.1. Link to comment Share on other sites More sharing options...
Kymnyth Posted September 8, 2009 Author Share Posted September 8, 2009 Any other suggestions before I seek an RMA number? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 10, 2009 Corsair Employees Share Posted September 10, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.