Jump to content
Corsair Community

Motherboard recommendation for 2 pairs of TWIN2X2048-8500C5D


Bkmdnao

Recommended Posts

Does anyone have a Intel Motherboard recommendation for running 2 pairs of Dominator TWIN2X2048-8500C5D?

 

Preferably one that will run stable with this memory and is not too expensive.

 

I had the 4 1Gb sticks running OK in an EVGA 680i board for a while but then they started acting up.:[pouts:

 

Thanks!

Dano

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 or DDR800 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...