c_orr Posted September 1, 2009 Share Posted September 1, 2009 Hi im new to the forums and having some issues with my RAM. I have 2GB of Corsair Dominator CM2X1024 - 8500C5D, been recieving BSODS and very unstable performance. Ive Run memtest and errors starting popping up bout 30 seconds into running the tests. I Recieve errors in tests 2 and 3. I have made sure my voltages are set correctly and i have the most up to date bios. I havent been overclocking or anything so i dont know why this has started happening. My system setup is as follows. Asus P5E3 Deluxe WiFi-AP 9800GTX Q6600 GO Windows Vista 32bit Running SP1 2 x 500 GB hard drives Please help my computer is currently very unstable and i cant use it properly =( Thanks c_orr Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 2, 2009 Corsair Employees Share Posted September 2, 2009 Try the setting below: SLI Ready: Disabled (this setting has nothing to do with your graphics SLI configuration, don't get confused) Memory Voltage: 2.1v TCL: 5 TRCD: 5 TRP: 5 TRAS: 15 Command Per Clock: 2T TRC: 28 NB Core Voltage: 1.4v Link to comment Share on other sites More sharing options...
c_orr Posted September 2, 2009 Author Share Posted September 2, 2009 I set the above configuration and I ran memtest again. I'm still getting errors though? I'm going to leave the computer on and use it and see if it is still very unstable I shall update as soon as some error comes up Link to comment Share on other sites More sharing options...
c_orr Posted September 2, 2009 Author Share Posted September 2, 2009 ok everything was stable for bout 20 mins, then bluescreen. Restart fine for another 10 mins then gone no blue screen just freeze... Had to hard reset. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 2, 2009 Corsair Employees Share Posted September 2, 2009 Let's get it replaced, please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.