Jump to content
Corsair Community

Any ETA on the 12 gig kit CMD12GX3M6A1600C8


Recommended Posts

I took out my TR3X6G1600C7D and replaced them with the new CMD12GX3M6A1600C8 with no issues at all. I didn't load the XMP, I just changed the timings from 7-7-7-20 to 8-8-8-24. I also left it at 1T instead of changing it to 2T. I am stable (a few hours on LinX) on 18x multiplier with a bclock of 200 (effective CPU at 3.8 and RAM at 1600). The only issue I ad was installing the fan... it was difficult to have the push-pull fan setup on my megahalems on the EVGA x58 SLI board. It was possible to do, but the ram fan sits slightly to the right and the push fan on the cpu does touch the stick in slot1. If you use such a setup, be careful not to push the stick in slot1 too far to the right when installing the push fan.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...