Jump to content
Corsair Community

TW3X4G1333C9DHX + bios settings


HaZiLLa

Recommended Posts

Ive tried to get this memory to run at 1333 mhz but reboots randomly when i get into windows, could someone please tell me what the timings/voltage and the rest of my bios settings are supposed to be at stock

 

Intel Q9450

GA-EP45T-UD3R

TW3X4G1333C9DHX

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 1.7 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...