Jump to content
Corsair Community

RMA request: TWINX2048-8500C5D


Recommended Posts

Hi, I've been through this before with this product... so I know the drill. :)


I have a TWINX2048-8500C5D set (matched pair of 1 Gbyte sticks DDR-II).


I made sure I had "the latest Bios version and then load setup/optimized defaults and set the Dim Voltage to 2.1 volts (+.3 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module I have.."


I began having system issues like freeze ups, etc, so I ran as a pair and each stick by itself (800MHz 5-5-5-15 @ 2.1V) using both Memtest 86+ 1.70 and Microsoft Windows Memory Diagnostic to test - lots of errors.

I made sure legacy USB was disabled, still no good.


I tried another motherboard slot, still no good.


I tried different pair of 1Gbyte DDR2 on my mobo, and it works fine.


I tried downgrading the BIOS, still NG.



Please help me RMA this pair, thanks a bunch. :)

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...