Safcandy Posted August 20, 2009 Share Posted August 20, 2009 Hi this is my first post which is a good thing (in that ive never had problems with corsair ram before) , anyway i recently got this ram , TWIN2X2048-6400C4 to go with my motherboard in the topic. When the ram is set to DRAM timing by SPD it runs at 5-5-5-18 which is slower than it should go , i tried to set the timing manually however there are a few settings im unfamiliar with. I found this picture of timing options on another site but i dont know what to set the them to for my ram. Any help would be appreciated. Edit : the image isnt showing so heres a link http://i183.photobucket.com/albums/x83/acinside/Msi_p35_neoF/E45bios_5.jpg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 21, 2009 Corsair Employees Share Posted August 21, 2009 Please go to BIOS setup then load setup defaults and then set the tested settings manually, from the link in my signature, should be all you need to do. DDR Voltage 2.1 Volts CAS# Latency = 4 RAS# to CAS# Delay = 4 RAS# Precharge = 4 RAS# Activate to Precharge = 12 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.