niols Posted August 13, 2009 Share Posted August 13, 2009 Hi every one! I have tested my memory with Memtest 2.10+ because I used to have a lot of blue screen of death. So first of all i test all my modules together (2*1Go+2*512Mo) and a lot of mistake occurs. Then I test my modules one by one and the results are that the 2 1Go are working perfectly (only one error on one of the two modules). But each of the two 512Mo modules have a lot of of error (one make the test freeze and couldn't end it). So I would like two know if any warranty operation is possible and how. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 13, 2009 Corsair Employees Share Posted August 13, 2009 Its never a good idea to mix memory and did you set the memory Voltage to 1.9 Volts and reset the BIOS when you test these modules by them selves? Link to comment Share on other sites More sharing options...
niols Posted September 26, 2009 Author Share Posted September 26, 2009 No I did not reset the BIOS; I'll do it and let you know. P.S. : sorry for the delay of answer Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted September 29, 2009 Corsair Employees Share Posted September 29, 2009 NP and if you do find that one is failing I would get the set replaced so they both match Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
niols Posted October 22, 2009 Author Share Posted October 22, 2009 Thanks for all your answers and tour time. I will follow your advice. Regards Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 22, 2009 Corsair Employees Share Posted October 22, 2009 NP Please let us know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.