Jump to content
Corsair Community

Valueselect pc3200 problem => desperate


Necromancer

Recommended Posts

i have bought a MSI K7N2Delta-L mainboard + amd 2500+ (barton) and 2 x 256 ValueSelect pc3200 modules i just cant get them in dual channel in single channel they work fine, but when i try dual, i get a ram error (beep & d-bracket) how do i solve this problem? i also tried: CORSAIR TWINX Matched DDR 2 x 256MB 466Mhz PC3700 CAS2 HSP LOW Latency Twinmoss 2x 512 pc3200 no result (error) :(: i don't know what to do anymore pls help greetz (pc: ram by spd (2.5/3/3/8) @ 2.7 V )
Link to comment
Share on other sites

  • Corsair Employees
Please set the memory Frequency at 100% and set the timings manually to Cass 2.5-3-3-7 and set the Dim Voltage to 2.7 Volts. If you have problems please test the modules one at a time with [url]www.memetst86.com[/url] and let's make sure one is not failing!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...