Jump to content
Corsair Community

Appropriate timings/voltage? TWINX1024-3200C2PT


Avalanchemg

Recommended Posts

MB MSI|VIA K8T800 K8T NEO-FIS2R CPU AMD 64 |3200+ ATHLON 64 DDRAM 1GB TWINX1024-3200C2PT Built a computer roughly 3 weeks ago. It runs well except for the random restarts. I figured that it was memory so I ran memtest86. After about 7 hours of running, I got errors in test 2 and test 7 (~208). After changing the ram around, (slot 1 and 3) and some voltages and timings, I have found that I only receive errors in test 7 now. (4 errors in 1 pass) It would make sense that I may not have put the correct settings in my bios. Any information regarding timings or voltages would be appreciated.
Link to comment
Share on other sites

  • Corsair Employees
Please try and set the timings manually to Cass 2.5-3-3-6 and set the Dim Voltage to 2.7 Volts and they should e in slots 1-3. The please test with [url]www.memtest86.com[/url]. If you still get errors, please follow the link bellow to get the modules replaced!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...