faysaln Posted August 4, 2009 Share Posted August 4, 2009 I have just assembled a system with Core2Quad 2.66Ghz processor, Intel DG35EC Mother Board,i bought two modules of RAM each of 2GB the model number mentioned CM2X2048-6400C5,when i install both the modules together on board my system crashes and gives Blue screen error and but when i run system with single module its runs fine but if pressure is put on system too heavy it crashes again i want help can any be of some assistance i'm really worried what is the problem i cant understand. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 5, 2009 Corsair Employees Share Posted August 5, 2009 Have you tested the modules one at a time with http://www.memtest.org to make sure one is not failing? Link to comment Share on other sites More sharing options...
faysaln Posted August 6, 2009 Author Share Posted August 6, 2009 Have you tested the modules one at a time with http://www.memtest.org to make sure one is not failing? yes i have tested individually both modules in every ram slot it works fine Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 6, 2009 Corsair Employees Share Posted August 6, 2009 If they both run and pass http://www.memtest.org when tested alone but fail when in D/C I would ask the MB Maker to check the MB. But if you want we can try replacing the modules, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.