Jump to content
Corsair Community

XMS3 DHX and Biostar TA790GX A3+


wellprometeus

Recommended Posts

Hi guys!

 

I want to know how I can run TW3X4G1600C9DHX in my Biostar TA790GX A3+ at 1600. My board have option to set memorys at 1600, but if I set, I receive the message: no DQS Recevier Enable pass window found

DQS RCVR EN pass window too small

I only run my memory at 1566 with HTT in 235. Not more than this.

 

Thanks for your help and sorry for my bad english.

Link to comment
Share on other sites

  • Corsair Employees
You will have to set the memory frequency to DDR1333 and over clock the CPU to get the memory to DDR1600 please do a Google search for your MB and Reviews for ideas on how to set your MB BIOS.
Link to comment
Share on other sites

Thanks for your reply, but I searched for this. But I don´t find anybody with same memory and same board.

I set mem at 1333 and a max HTT is 235. If I set 236, I have the same message about DQS. Mems setted at 1333, 1.8v, 9-9-9-24, all ohters in auto. Maybe any option can help if setted manually?

Thanks again!

Link to comment
Share on other sites

  • Corsair Employees

I have not seen this MB did you try a Google search? And you will like I said before need to over clock the CPU to get the memory at DDR1600 with this platform.

Doing a Google search here are just a few I found but there are hundreds of them.

Review on Toms Hardware

VRZone Review

TrustedReviews.com

AMDZone.com

 

I think someone should do a How to use Google Youtube hu?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...