Jump to content
Corsair Community

Striker II extreme & dominator GT 2000mhz


marto

Recommended Posts

Firstly a big hello to everyone.

 

New to the forums :D:

 

I recently bought a striker II extreme board and i would like to buy some 2000MHz dominator GT ram.

I have found a kit that i like but I'm not sure if its compatible with my motherboard.

P/n : TR3X6G2000C8GTF

 

Will it work?

 

Thanks in advance.

 

cheers

martin.

Link to comment
Share on other sites

hey mate

 

Thanks for the reply

 

If i use 2 sticks of the 3 its all good?

 

Is there any difference between the too?

 

CMG6GX3M3A2000C8

TR3X6G2000C8GTF

 

i could ask the store to get it in for me if its worth the hassle, as they only have the TR3X**** kit available or listed on the website.

I have to deal with this company because i might be sending back a different brand of ram because of instability, and i was going to swap it with a nice set of corsair.

I just want to make sure my second choice is the right one.

 

oh one more question

it states on the store webpage that..

 

•Each three module set is tested at 2000MHz

•Tested together at 2000MHz, Vdimm = 1.65V, at latency settings of 8-8-8-24 on X58-based motherboards

•SPD programmed at: XMP 8-8-8-24 values at 2000MHz at 1.65V Vdimm

•JEDEC standard 9-9-9-24 values at 1333MHz.

 

with my striker II extreme mobo (790i ultra chipset)

with the modules set at 2000mhz will i be able to achieve 8-8-8-24?

will XMP function?

does it need to?

 

cheers

martin.

Link to comment
Share on other sites

  • Corsair Employees
Either part will be fine if they still have the Tr3X6G2000C8GTF they will be fine just note what wired had stated, and Getting 1600-1800 Mhz on a strikers II MB will be good. The CPU you use will be the biggest factor on how well it will over clock.
Link to comment
Share on other sites

I know you've already said it but can I confirm that using 2 of the 3 RAM sticks from the CMG6GX3M3A2000C8 package is compatable with the asus striker 2 extreme motherboard. I just dont want to make a mistake a risk ~$500-$600 ><

 

Thanks in advance!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...