spacedskunk Posted July 28, 2009 Share Posted July 28, 2009 A few days ago I got an upgrade. Built the system up and it will only boot with 1 memory stick in, and it has to be either in Dimm 1 or Dimm 3 (there are 4 dimms) The manual says put them in Dimm 1 and 2, but with 2 sticks in it just doesnt boot. It does however boot in dimm 1 and 3, but I lose dual channel... Basically it doesnt post at all, and its fustrating me. I've tried BIOS matching the ram settings so 9-9-9-24 @ 1.8V/1600MHz but still the same. I've tried clearing CMOS and using default settings. Can anyone help me please? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 28, 2009 Corsair Employees Share Posted July 28, 2009 That would suggest either BIOS is in need of an update or the slots are failing or the CPU has a failing memory controller. Link to comment Share on other sites More sharing options...
spacedskunk Posted July 29, 2009 Author Share Posted July 29, 2009 That would suggest either BIOS is in need of an update or the slots are failing or the CPU has a failing memory controller. Thank you for the reply! Yes it was the CPU, its fully working now...man this thing flies! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 31, 2009 Corsair Employees Share Posted July 31, 2009 Great news and thank you for letting me know! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.