Jump to content
Corsair Community

GigaByte MA780G-UD3H and 2x TWIN2X2048-8500C5D


Recommended Posts

Hi guys, i just been upgrading my pc, with some new stuff, today the people at the store sold me 2 kits of memory of which they were convinced it would work with my mainboard... Ok, so i insert the first kit, no problem, then 1 module of the second kit, still fine, then the 2nd module of the 2nd kit, and my system fails... it gives me a continues beep for about 3 seconds, then seems to be trying to reboot the system...

I've been over the forum, have sought contact with gigabyte, tried to raise the voltage of the north-bridge all seems to fail whatsoever.

When i take the out the 4th module, it's all fine again.


EDIT: PS. my Bios version is F2 i updated it yesterday to have my phemon working on the AM2+ board

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...