AnteC Posted July 25, 2009 Share Posted July 25, 2009 Hello. I have Gigabyte GA-EP43-S3L motherboard. I bought Corsar TWIN2X2048-8500C5D. If I make in BIOS|M.I.T.|System Memory Multiplier - "Auto" (800MHz) - memtest86+ 2.11 has no problem. But if i use 3.2B (1066 MHz) - memtest86+ 2.11 find many faults. Also Standard Timing Control 7-7-7-20 Please help me. PS Sorry my bad english Link to comment Share on other sites More sharing options...
Wired Posted July 25, 2009 Share Posted July 25, 2009 What CPU do you have? What voltage are you setting the memory to? Please add your specs to your profile as per the registration process. Link to comment Share on other sites More sharing options...
AnteC Posted July 25, 2009 Author Share Posted July 25, 2009 What CPU do you have? What voltage are you setting the memory to? Please add your specs to your profile as per the registration process. I added CPU and etc in my profile. I set 1.8V(by default) also try 2.0V, but memtest86+ has faults in any way. Link to comment Share on other sites More sharing options...
Wired Posted July 25, 2009 Share Posted July 25, 2009 TWIN2X2048-8500C5D needs either 2.1v or 2.2v. The memory label will list the correct voltage. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 27, 2009 Corsair Employees Share Posted July 27, 2009 Also I would test the modules one at a time with the tested settings manually set and with that chipset you may have to set the CPU manually as well the Divider does not work out to DDR1066 with a 1333 FSB CPU so slightly over clocking the CPU should fix that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.