partybob99 Posted July 21, 2009 Share Posted July 21, 2009 I have 2x2gb modules and 2x1gb modules for my PC. When the original 2x2gb modules were purchased one was bad right out of the box. Now after experiencing BSODs at an ever alarming rate, I decided to run memtest v2.11. One module immediately showed thousands of red errors. I was able to isolate it to one stick and tried the stick in more than one memory port. All errors. This is disappointing. Please advise as I'd like to send in my two 1gb sticks for warranty repair. My profile shows the part numbers. Thanks Link to comment Share on other sites More sharing options...
partybob99 Posted July 21, 2009 Author Share Posted July 21, 2009 Whoops I forgot to mention the problem lies with the 1gb modules this time. The 2x2gb modules are fine. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 21, 2009 Corsair Employees Share Posted July 21, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.