Sublym3 Posted July 11, 2009 Share Posted July 11, 2009 Hi everyone, I am actually having some problems with a hard drive, but it has been suggested that it could be the power supply causing the problems. I am using a HX-620 and what I would like to know is how can I tell if the PSU is supplying the correct voltages etc? These are the readings from bios +3.3 - 3.32V +5 - 4.83V +12 - 11.89V +5VSB - 4.89V The readings from SpeedFan were much the same except the +12 was around 11.70. Any help is appreciated Cheers Link to comment Share on other sites More sharing options...
FEAR6655 Posted July 11, 2009 Share Posted July 11, 2009 Those voltages are fine. If it was the PSU you would see instability during high load, unlikely for it to affect just 1 component. Link to comment Share on other sites More sharing options...
Sublym3 Posted July 11, 2009 Author Share Posted July 11, 2009 Ok cool thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.