Jump to content
Corsair Community

Biostar 790GX 128M not compatible with Corsair Dominator 1066 mhz??


Snakepriest

Recommended Posts

Hello all....sorry for bad english but i will make sure i will be clear about this problem.i bought Corsair Dominator 2x2 GB 1066 mhz and it works fine on 800 mhz with Biostar 790GX 128M but when i bump to 1066 mhz and set voltage to 2.1 my screen freeze in 10 seconds after Windows entering.

 

I also bumped voltage of NB and Ht Link but i have same problem,but sometimes i enter in OS 1066 mhz without any problem but mostly i get frozen screen.i also tested memory on memtest integrated in my motherboard and it passes without problem on 1066 mhz...i had this same problem with ******** 2x2 GB and I replaced ******** with Corsair but the same problem is here...

 

 

Problem solved

Issue: Phenom II B50 X4 have dead memory controlers for 1066 mhz,when i switch to dual core i run 1066 mhz without any problems...

Link to comment
Share on other sites

  • Corsair Employees

Problem solved

Issue: Phenom II B50 X4 have dead memory controlers for 1066 mhz,when i switch to dual core i run 1066 mhz without any problems...

 

Thanks for the update, let us know if you have any other problems!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...